RLS-1000B Link Port Switch

RLS-1000B Remote Link Switch

Use the new RLS-1000B Remote Link Switch to connect three transceivers to the remote base input port of any controller including the CAT-1000, CAT-700B, CAT-300DXL, CAT-250, and the CAT-200B controllers. Transceiver selection is accomplished by grounding control lines. Since the audio and COR inputs are mixed, all three transceivers can be selected at the same time.

RLS-1000B

Board Dimension 7.0 X 3.0 Inches

RLS-1000B Back

RLS-1000 (left) mounted in optional RME-200L cabinet.

Features
Connect three input ports to one output port. Independent selection of each port for simplex or full duplex operation. Select COR logic as active high or low. Select Port #1 priority over Ports #2 and #3. The frequency response is flat over a range greater than 300 to 3000 Hz. Level adjustments on both the input and output amplifiers makes it easy to compensate for varying input and output requirements. The audio input impedance is 10K ohms while the output is 600 ohms. Transceivers interfaced through separate [DB9] connectors while the controller interfaced is through a [DB25] connector.

Outline Drawings
CAT-1000

Ordering Information
RLS-1000B	Remote Link Switch Board $129.00
RME-200L	Rack Mount Enclosure $59.00
Order Online

This site is best viewed with minimum Internet Explore 5.0, Netscape 6.0, and Firefox 2.0.

Computer Automation Technology, Inc.
4631 N.W. 31st Avenue, Suite 142
Fort Lauderdale, Florida 33309

Send mail to Webmaster with questions or comments about this web site.