Computer Automation Technology

ED-300DXL Editor for the CAT-300DXL

The CAT-300DXL Windows Editor offers a monumental break through in repeater controller programming. No endless string of DTMF tones to enter or confusing script files to write. Completely mouse driven, just point and click. Program codes, timers, voice messages and speed dial numbers. Schedule events, write macros and design custom courtesy tones without ever touching your computer's keyboard.

 

Voice Messages

A vocabulary list of 470 words carefully selected for amateur repeater operation is available to construct any of 20 different voice messages. Each message can be 23 words in length. Configure your repeater ID and announcements to suit your particular needs. Chimes, sound effects and salutations in a female voice are also included. From the base voice message display window, place the hand on the message cell and double click.

The voice synthesizer editor dialog box window will appear. From the base voice message display window, you place the hand on the message cell and double click. The voice synthesizer editor dialog box window will appear. All you do is double click the letters, words and numbers in the voice word table to construct your desired message.

 

User Speed Dial

In the CAT-300DXL, memory is provided for one-hundred speed dial numbers with call letter identification. To program a speed dial location from the user speed dial window, place the hand on the telephone number cell and double click. The keypad window will appear. Use the keypad to enter the telephone number and click OK. Place the hand on the identification cell and double click. The voice synthesizer editor box window will appear. Double click the letters, words and numbers in the voice word table.

 

Base Zones Configuration

The CAT-300DXL has sixty-four remote control channels divided into groups of eight zones with eight channels each according to their function. These channels can be manually controlled through the repeater, telephone, or automatically controlled through the action of the scheduler. From the BASE ZONE window, place the arrow on the ZONE TAB of interest and click. The selected zone card will move to the front of the window and the enabled channels in that zone will appear with a check mark in the boxes. To change the status of a control channel in the zone, place the arrow in the desired box and click.

 

Scheduler Configuration

To program a scheduled event, from the SCHEDULER window, place the hand on the TIME cell and double click. The SCHEDULER POSITION window will appear. Place the hand on the COMMAND cell and double click. The KEYPAD window will appear. Use the keypad to enter the COMMAND and click OK.

 

Control Codes Configuration

The control codes are from one to seven digits. From the REPEATER BASE CODE window, place the hand on the CONTROL OPERATOR PREFIX cell and double click. A KEYPAD window will appear. All you do is use the key pad to enter a new control operator prefix code and click OK.

 

Timers Configuration

All CAT-300DXL sixteen repeater timers are easily programmed with this windows editor. Just point and click.

 

System Requirements
CAT Editor For Windows requires an IBM® or compatible PC, 2MB RAM, Microsoft® Windows 95, 98, 2000, NT, XP, Vista, Win7 or Win8.

 

Ordering Information

ED-300DXL Editor Program For Windows: $69.00.