Announcement

Collapse
No announcement yet.

Linked Repeater Macro's

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Linked Repeater Macro's

    I have a repeater at the end of a four repeater link system. It uses a CAT-700 controller with a RLS-1000 board connected to port 2. This link system uses a UHF backbone system and has two UHF mobile radio's and one VHF mobile radio hooked to the RLS. The two UHF radio are for the link system. One is pointed West to the 147.135 repeater and the other is pointed East to connect to the Jackson repeater for Skywarn. And the VHF is for a remote to a stand alone repeater to the South. These macro's control the RLS board. Here is some macro's that I use.

    * 14 01 981 * 3016 3017 5906 1581 1571 1561 1550

    3016 = plays message 16 (link 2 the 1 40 7 point 135 repeater now connected)
    3017 = plays message 17 (link 2 the 4 40 4 point 9 0 0 repeater now connected)
    5906 = load memory file 6
    1581 = turns on zone 5 channel 8 (user function output 4) controls RLS repeater port
    1571 = turns on zone 5 channel 7 (user function output 3) controls RLS port 3 (west link radio)
    1561 = turns on zone 5 channel 6 (user function output 2) controls RLS port 2 (east link radio)
    1550 = turns off zone 5 channel 5 (user function output 1) controls RLS port 1 (remote radio)

    *14 02 971 * 3016 5906 1581 1571 1560 1550

    3016 = plays message 16
    5906 = load memory file 6
    1581 = turns on zone 5 channel 8
    1571 = turns on zone 5 channel 7
    1560 = turns off zone 5 channel 6
    1550 = turns off zone 5 channel 5

    *14 03 961 * 3017 5906 1581 1561 1550 1570

    3017 = plays message 17
    5906 = load memory file 6
    1581 = turns on zone 5 channel 8
    1561 = turns on zone 5 channel 6
    1550 = turns off zone 5 channel 5
    1570 = turns off zone 5 channel 7

    *14 04 951 * 3019 1580

    3019 = plays message 19 (this repeater not connected 2 link system)
    1580 = turns off zone 5 channel 8

    *14 05 14670 * 3018 1551

    3018 = plays message 18 (link 2 the 147 point 7 0 0 repeater now connected)
    1551 = turns on zone 5 channel 5

    *14 06 911 * 5901

    5901 = loads memory file 1 (which turns every thing off and makes repeater normal)

    ================================================== ======================
    Scheduler strings are:

    *11 01 11 55 0 00 00 1380 (turns zone 3 channel 8 off)

    *11 02 12 00 0 00 00 3015 (plays message 15)
    {it is (time of day) and this is the W5KGT repeater on the N5RD link system}

    *11 03 12 05 0 00 00 1381 (turns on zone 3 channel 8)

    I do the same thing for 6:00am and pm and Midnight.
    Last edited by W5KGT; 01-02-2006, 09:51 AM.
Working...
X