Announcement Announcement Module
Collapse
No announcement yet.
Help programming a macro with the editor software Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help programming a macro with the editor software

    Hello and I hope someone can help me out..

    I try commands but I am lost.

    this is what I want... I want to assign a user code example 123 so that when the person sends 123 message 4 will play.

    how can I program this into the cat-300dxl editor???

    Thanks in advanced...

    miguel,ac4mo

  • #2
    Macro

    Try this:

    *14 03 123 * 3004

    *14 = macro programming code (macro programming page 5-4)
    03 = macro slot number
    123 = macro DTMF command
    * = programming divider
    3004 = play message four (internal command structure page 5-2)

    in the figure on page 5-4. the description is wrong. Swap "Time of day request code" and "Macro control number". They are labeled wrong.

    Comment


    • #3
      I will give it a try...

      Originally posted by W5KGT View Post
      Try this:

      *14 03 123 * 3004

      *14 = macro programming code (macro programming page 5-4)
      03 = macro slot number
      123 = macro DTMF command
      * = programming divider
      3004 = play message four (internal command structure page 5-2)

      in the figure on page 5-4. the description is wrong. Swap "Time of day request code" and "Macro control number". They are labeled wrong.
      Hello, Kevin!!
      thanks for the reply, I will give it a try...

      Thanks
      Miguel,ac4mo

      Comment

      Working...
      X