Announcement Announcement Module
Collapse
No announcement yet.
VHF Repeater and Link system Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • VHF Repeater and Link system

    The 147.135 repeater has a CAT-1000b with a DVR board and a RLS-1000.
    It has two UHF link radios, one points west to a UHF hub repeater and the other points east to the 145.35 that is in the CAT-700 macro exchange forum.
    Here are some macros and schedular strings that I use.

    Macro 1 DTMF=146940
    *14 01 146940 * 6401 4002 6400 3031
    6401 = PTT #2 control on
    4002 = send DTMF tones (Generator location 2) 1 4 6 9 4 0
    6400 = PTT #2 control off
    3031 = plays message 24 (This repeater is not connected 2 the 1 40 6
    point 9 4 repeater)

    Macro 2 DTMF=9854
    *14 02 9854 * 1650 3029 1651
    1650 = turns off zone 6 channel 5 (transceiver voice)
    3029 = plays message 29 (east side link not connected)
    1651 = turns on zone 6 channel 5

    Macro 3 DTMF=9855
    *14 03 9855 * 1650 3030 1651
    1650 = turns off zone 6 channel 5 (transceiver voice)
    3030 = plays message 30 (west side link not connected)
    1651 = turns on zone 6 channel 5

    Macro 4 DTMF = 881
    *14 04 881 * 3025 5208 7001 7004
    3025 = plays message 25 (east and west link system connected please identify)
    5208 = load memory file 8
    7001 = link control on
    7004 = link bridge up

    Macro 5 DTMF = 146941
    *14 05 146941 * 5206 6001 6401 4001 6400 3031
    5206 = load memory file 6
    6001 = time delay 1 sec.
    6401 = PTT #2 control on
    4001 = send DTMF tones first slot (14691)
    6400 = PTT #2 control off
    3031 = plays message 31 (This repeater is now connected the the 1 40 6 point 9 4 machine
    to the east)

    Macro 6 DTMF = 871
    *14 06 871 * 3023 5207 7001 7004
    3023 = plays message 23 (west side link connected please Identify)
    5207 = load memory file 7
    7001 = link control on
    7004 = link bridge up

    Macro 7 DTMF = 861
    *14 07 861 * 3024 5206 7001 7004
    3024 = plays message 24 (east side link connected please Identify)
    5207 = load memory file 7
    7001 = link control on
    7004 = link bridge up

    Macro 8 DTMF = 851
    *14 08 851 * 3009 5205 7001 7004
    3009 = plays message 9 (This repeater is not connected to link system)
    5205 = load memory file 5
    7001 = link control on
    7004 = link bridge up

    Macro 9 DTMF = 1286
    *14 09 1286 * 1351 4428
    1351 = Turns on zone 3 channel 5 (drop out message 1) DVR "Skywarn is activated"
    4428 = copy voice message 28 to message 11 (courtesy tone)

    Macro 10 DTMF = 12860
    *14 10 12860 * 1350 4409
    1350 = Turns off zone 3 channel 5
    4409 = copy voice message 09 to message 11 (courtesy tone)

    Be back to finish schedular later.
    Last edited by W5KGT; 04-14-2006, 06:16 AM.
Working...
X