Announcement Announcement Module
Collapse
No announcement yet.
Problems with DTMF commands... Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Problems with DTMF commands...

    We have a CAT-400 on our VHF repeater and a CAT-200 on our UHF repeater. We took the link port from the 200, and connected it to port 2 on the 400 to link the two repeaters together. This is so each repeater has its own controller, ID?s etc, and so we can bring down the link and still have 2 operational repeaters.

    The problem we are having is the 400 will not respond to ANY DTMF commands when we have the 200 linked over. Once I go to the 200 controller and send the link down (5000) command, now the 400 will respond to DTMF commands.

    I went thru and verified that all the RX ports are set to 220mv. Not sure if anyone else has seen this before but any help would be great!!

    Thanks,
    Dave
Working...
X