Announcement Announcement Module
No announcement yet.
DL-1000 on Maxtrac Page Title Module
Move Remove Collapse
Conversation Detail Module
  • Filter
  • Time
  • Show
Clear All
new posts

  • DL-1000 on Maxtrac

    Hey Everyone,

    I have a Radius M208 and Maxtrac i'm trying to interface with the DL-1000, but I am getting no audio.

    Power is good to the DL-1000

    I have the CAT with the 4 pin (no cor pin 5) connector, so I have connected my radios COR into the DL-1000 Pin 5 direct via the J4 connector (COR#1 from the receiver) on the CAT-1000 (cor is active high), but no audio is passed.

    Anyone know what this might be? My Maxtrac/Radius (tried both) COR is pin #8 and is configured in RSS as PL/CSQ Det Active High


    Chris W / N0ALE
    Glass blown bowl
    Last edited by ChrisW; 09-02-2011, 10:07 AM.